Read Mac Drive On Pc Free

TRYING TO READ A MAC DRIVE ON A PC. You’re familiar with the problem; without any changes, your PC is going to invite you to delete all the data on the external drive and reformat it to work with Windows once you insert it into the USB port or plug in the external device: If you need to access that drive, this message is a scary one!
A drive formatted in this fashion can be swapped between a Mac and Windows PC. However, you might choose instead a format you can use easily with OS X, Windows, and Linux. Topher Kessler wrote in.

If you dual-boot your Hackintosh, you've probably noticed that Windows can't read hard drive partitions used by Mac OS X. Mac OS X uses the HFS+ hard drive format, which Windows doesn't support. Luckily, you can enable HFS+ support on Windows with the help of one or two Windows drivers (depending on your budget). Read past the break for a tutorial on how to access your Hackintosh's Mac OS X hard drive partition from Windows.

Best free data recovery software for Mac and Windows: is HFSExplorer?HFSExplorer is an application that can read Mac-formatted har. Well, Stellar Toolkit for Data Recovery is a Windows-based software that offers you to retrieve a Mac’s HFS or HFS + hard drive using a Windows computer. With this application, you can directly connect your MacBook‘s hard drive to a Windows PC (laptop or desktop system) and perform hassle-free recovery of pictures, videos, documents, etc.

Mounting on MAC OS X. For Mac OSX Users: everything works pretty similar to Linux, just use the 'rdisk', e.g. If you plug in the disk you'll see it in 'Disk Utility'. If a laptop is used, you can get a USB->SATA converter and it works just fine.

The hard drives of Apple's Mac computers are formatted in a different way, known as HFS, than hard drives that have the Microsoft Windows XP installed on them. As a result, Mac drives cannot be read by PC computers by default. With MacDrive 9 Standard, you can access, manage, and even create and format disk drives for Apple's Mac OS from inside Windows Explorer. Not just hard drives, but removable USB drives, too.

LATEST UPDATE (January 26, 2013): Added Apple's Boot Camp Drivers to the article.

Paragon HFS+ ($20)
Paragon HFS+ ($20) is a Windows application that mounts all of your Mac hard drives in Windows Explorer (a.k.a. My Computer) and gives you read and write access. There's a 10-day trial available. Paragon HFS+ runs in the background and automatically starts on bootup, so accessing your Mac drives will feel exactly like accessing normal Windows drives.
Paragon is the same company that makes NTFS+ for Mac OS X, my recommended solution for enabling NTFS write support on Mac OS X Lion. If you're looking for an alternative to Paragon HFS+, then you can also consider MacDrive ($50; 5-day trial), which is the solution that I'm currently using on my own Hackintosh. It has a higher price tag and doesn't offer much more than Paragon HFS+, but it's an option. If purchasing apps is not an option for you, check out the following section.
Apple Boot Camp Drivers (Free)
Apple's Boot Camp software is designed to help you run Windows on real Macs. Among other things, Boot Camp includes built-in HFS+ drivers for Windows. These drivers will mount your Mac hard drives in Windows Explorer and give you read access (but no write access). If you don't need to write any files to your Mac hard drives, using them is a free and relatively pain-free solution.
While the HFS+ drivers are normally packaged as part of Apple's Boot Camp Assistant software, you can download them separately below.
DOWNLOAD: HFS Driver v.4.0.2.0
The above download is a ZIP file; open the file in Windows by double-clicking it. Once opened, double-click the 'Add_AppleHFS.reg' file. This will add the Boot Camp drivers to your Windows registry.
Next, open either the 'For 32-bit Windows' or 'For 64-bit Windows' folder, depending on your copy of Windows. (To find out whether your copy of Windows is 32-bit or 64-bit, click on the Start Menu, and then right-click on 'My Computer' and go to 'Properties'.) Inside these folders are two device driver files. Copy these two files to C:WindowsSystem32drivers. This will install the actual drivers into Windows; reboot your computer afterwards. Once Windows has restarted, your Mac hard drives will be mounted, and you will be able to read files from them properly.
NOTES:

This method has only been confirmed to work with Windows 7 and Windows 8.
You must uninstall Paragon HFS+ or MacDrive from your computer before installing Apple's HFS+ drivers.
To uninstall Apple's HFS+ drivers, delete the two driver files from C:WindowsSystem32drivers. Restart your computer. Then, double-click on the 'Remove_AppleHFS.reg' file to remove the drivers from your Windows registry.

SOURCE: Apple HFS+ Windows Driver (Download) [MacRumors]
If you dual-boot your Hackintosh, you've probably noticed that Windows can't read hard drive partitions used by Mac OS X. Mac OS X uses the HFS+ hard drive format, which Windows doesn't support. Luckily, you can enable HFS+ support on Windows with the help of one or two Windows drivers (depending on your budget). Read past the break for a tutorial on how to access your Hackintosh's Mac OS X hard drive partition from Windows.

Having read/write access for your Mac partition on Windows will come in handy if your Hackintosh becomes unbootable, because you'll be able to boot into Windows to recover your files (and possibly fix your Hackintosh's boot problem). On top of that, it's simply convenient.
LATEST UPDATE (January 26, 2013): Added Apple's Boot Camp Drivers to the article.

Paragon HFS+ ($20)
Paragon HFS+ ($20) is a Windows application that mounts all of your Mac hard drives in Windows Explorer (a.k.a. My Computer) and gives you read and write access. There's a 10-day trial available. Paragon HFS+ runs in the background and automatically starts on bootup, so accessing your Mac drives will feel exactly like accessing normal Windows drives.
Paragon is the same company that makes NTFS+ for Mac OS X, my recommended solution for enabling NTFS write support on Mac OS X Lion. If you're looking for an alternative to Paragon HFS+, then you can also consider MacDrive ($50; 5-day trial), which is the solution that I'm currently using on my own Hackintosh. It has a higher price tag and doesn't offer much more than Paragon HFS+, but it's an option. If purchasing apps is not an option for you, check out the following section.
Apple Boot Camp Drivers (Free)
Apple's Boot Camp software is designed to help you run Windows on real Macs. Among other things, Boot Camp includes built-in HFS+ drivers for Windows. These drivers will mount your Mac hard drives in Windows Explorer and give you read access (but no write access). If you don't need to write any files to your Mac hard drives, using them is a free and relatively pain-free solution.
While the HFS+ drivers are normally packaged as part of Apple's Boot Camp Assistant software, you can download them separately below.
DOWNLOAD: HFS Driver v.4.0.2.0
The above download is a ZIP file; open the file in Windows by double-clicking it. Once opened, double-click the 'Add_AppleHFS.reg' file. This will add the Boot Camp drivers to your Windows registry.
Next, open either the 'For 32-bit Windows' or 'For 64-bit Windows' folder, depending on your copy of Windows. (To find out whether your copy of Windows is 32-bit or 64-bit, click on the Start Menu, and then right-click on 'My Computer' and go to 'Properties'.) Inside these folders are two device driver files. Copy these two files to

C:WindowsSystem32drivers. This will install the actual drivers into Windows; reboot your computer afterwards. Once Windows has restarted, your Mac hard drives will be mounted, and you will be able to read files from them properly.
NOTES:

This method has only been confirmed to work with Windows 7 and Windows 8.
You must uninstall Paragon HFS+ or MacDrive from your computer before installing Apple's HFS+ drivers.
To uninstall Apple's HFS+ drivers, delete the two driver files from C:WindowsSystem32drivers. Restart your computer. Then, double-click on the 'Remove_AppleHFS.reg' file to remove the drivers from your Windows registry.

SOURCE: Apple HFS+ Windows Driver (Download) [MacRumors]

Free Mac Hard Drive Reader For Pc

Pew Pew madafakas!Linux Reader

Overview
Guide in Pictures

Free DownloadGet Prices

Here you will find out:

how to mount Linux drive on Windows

how DiskInternals can help you

Are you ready? Let's read!

Mount Linux drive on Windows

If the Linux distribution on your PC coexists with Windows, then accessing the Windows partition will be no problem. NTFS is the default Windows file system and is well supported. Most Linux distributions can easily mount NTFS drives.

However, Windows users cannot do this. Common Linux file systems such as Ext4 are not supported. If you want to access a Linux partition in Windows, you need to install some additional software in order to mount a Linux drive on Windows.

For some people, it can be difficult to mount a Linux drive on Windows. However, there is a most convenient and user-friendly software tool that will help make the process a whole lot easier.

In order to mount a Linux drive in Windows, you need software help, and we’ll help you with that.

What file systems can be on Linux?

There are a lot of file systems on Linux that can be accessed by Windows indirectly; the first step in doing so is to mount the Linux drive on Windows 10.

The following file systems are available and are easy to access on Windows. There are a bunch of file systems on Linux; here is a list:

Ext2/3/4

ReiserFS, Reiser4

HFS, HFS+

FAT, exFAT

NTFS, ReFS

UFS2

Hikvision NAS and DVR

In order to mount a Linux partition on Windows, the software is available to help you out.

How to mount a Linux partition in Windows

DiskInternals Linux Reader™ is a state-of-the-art software tool that allows file systems to be easily mounted in Windows. This software is easy to follow, easy to install and download, and most importantly, supports a wide array of Linux file systems.

With free and premium options available, you will get tons of features, get your drive mounted and read easily, regardless of the option you choose.

It is effective and easy. Using this software, you will be in control. You'll be able to follow the steps of the process and not get lost because of its powerful UI.

Step-by-step guide to mounting a Linux partition on Windows

DiskInternals Linux Reader™ is one of the most groundbreaking pieces of software to be released to the public. If you’re someone that wants to get your Linux partition mounted on Windows, this is a step-by-step guide to the whole process:

1. Download DiskInternals Linux Reader™.

2. Install the software on any drive you see fit.

3. After installation, click Drives.

4. Then go to Mount Image.

5. Select Containers and click Next.

6. Select the drive and continue; the process will run automatically from here.

There is a slew of reasons why you should use DiskInternals Linux Reader™ for your Linux mounting and reading needs.

In conclusion, this article talked about the best software for your mounting and reading needs with all the relevant information regarding the available file systems and a lot more. If you want the best software for this kind of task, DiskInternals Linux Reader™ is the way to go.

Linux ShellZSHBashPerlExt2/Ext3/Ext4Arch LinuxSystemdNewGot error or failureHow toAbout a bash date commandGuide in PicturesShell script usageBash: A Script For User InputHere is everything you need to know about Bash for WindowsBash Script SSH: How to Use ItHow to use bash get script directory in LinuxCopy command in shell scripts

Learn about a bash error code

5 Basic Shell Script Examples for Your First Script

How to Check Bash String Equality

How to Use Linux Wait Command

Bash: How to Loop Through Files in Directory

20 Examples of Bash Find Command

Bash Cat Command in Examples

Linux ZSH: the basic you need to know

Shell Script Cut: Basic You Need to Know

Bash: How to Check if String Not Empty in Linux

Basic of Grep in Linux Shell Script

Bash: how to split strings in Linux

An Algorithm: How to Create Bash While Loop

Bash Time Command on Linux

Bash: How to Check if the File Does Not Exist

How to Use Shell Script Sleep Command

Linux Shell: What You Need to Know at First

Bash Script: All You Need to Know

How to Mount Ext4 on Windows for Free

How to Access Ext4 from Windows

How to Access Linux Ext2 or Ext3 on Windows

Linux: Sudo in Bash Scripts

A Linux bin/bash Shell

Linux: Bash Printf Examples

Linux: Bash First Line

Linux: Write a Shell Script

Linux: A Bash Source Command

A Bash to Loop through Lines in File

A Bash Test Command

A Bash‌ ‌Status‌ ‌of‌ Last‌ ‌Command‌

About Bash Language

Linux: New Line in Shell Script

Linux: $0 in a Shell Script

Linux: A Bash Startup Script

A Bash Multiline Command

A Bash Dirname Command

Linux: A Bash Linter

A Bash Nested Loop

Use a Shell Script to Send an Email

Hello World Script in Bash

A crontab service shell script

Bash and sh: is there any difference

Linux: A Bash Basename Command

Using Bash to Write to a File

AWK in a Bash Script

Learn about systemd startup script

About chaining bash commands

Using a bash tee command

Learn about useful bash scripts

Bash for Loop in One Line

Learn about a bash wait command

Arch Linux install script

About advanced bash scripting

To run a shell script in Dockerfile

About a bash export command

About a bash UNTIL loop

Using /usr/bin/env command

Learn about Korn shell scripting

Shell Script: Replace String in File

Linux: Bash String Ends With

Find Drives On This Computer

Whether bash waits for command to finish

Using bash if 0

Using && in an IF statement in bash

If you want to run shell script in background

The disk you inserted was not readable by this computer error

Learn about C shell script

Learn about SFTP in bash scripting

Install Oracle Database

Examples of using the Expect

Learn to run Perl script in Linux

FREE DOWNLOADVer 4.8, WinUpgrade to PRO